Optimal working height
Paint oil and hazardous fluids
Low noise, low energy, durable
Compact cans, drums & tins up to 6½ gal.
The Mil-tek 2101S Stainless Steel Can Crusher is a small footprint can compactor from Mil-tek. It is capable of crushing and compacting tins, cans and drums up to 6½ gal. (30 liters) in size.
Compacting cans in a Can Crusher reduces their volume by up to 90%, making them much easier to store and easier to recycle.
The stainless steel design makes it significantly more durable than other can presses, and makes it suitable for almost any form of metal, non-aerosol containers. Additionally, the stainless steel is easier to clean and easier to maintain.
With a footprint of less than 3 square foot, the 2101S Can Crusher is ideally suited to locations and workplaces where space is limited.
It can be supplied with or without stainless steel legs, allowing for convenient installation and operation at a normal working height.
The Mil-tek 2101S Stainless Steel Can Crusher features enhanced safety features EN16500 including fail-safes, a cycle counter and a patented new door locking mechanism.
Powered exclusively by compressed air, the 2101S Stainless Steel Can Crusher is low-energy, small-size and very safe to use.
The University of Mary Washington is a liberal arts and sciences university in Virginia. They partner with Sodexo to manage their waste. Sodexo opted for a Can Crusher to facilitate easy compaction and transportation food cans.
Hörby Paint Shop is an auto paint shop and bodywork shop in Sweden. The 101 Can Crusher reduces the cost of refuse and eliminates the need to rent a container.
Rosenlunds Vårdcentral is a hospital in central Stockholm. They use a can press in order to hygienically reduce the volume of waste produced.
Installation is as simple as providing the 2101S Can Crusher with compressed air. Depending on requirements, the machine can be supplied with or without legs.
Place an empty tin or canister upright into the can press. The machine can crush containers up to 30 litres in size.
To activate the can press, firmly close the door and pull down the activation handle. This activates the pressing cycle, which takes around 7-10 seconds.
All kinds - tins, cans, paint cans, oil drums, all kinds of hazardous and non-hazardous containers except pressurized aerosol cans.
No, the most important thing is that the cans are empty. However, to maximize the lifespan of your machine, we recommend rinsing cans in cold water before crushing.
The machine can stand either indoors or out - most important is that you place the machine so that you sort your trash at its source. If you place the machine outside it must be under a roof. Be aware that cold weather conditions can influence the performance of the machine. Your Mil-tek consultant will help to analyze the best place to install the machine.
Up to 90% for most cans, tins and drums. This makes storing waste significantly easier, and also facilitates aluminium recycling for correctly managed waste that is brought ashore.
The hygienic, environmentally friendly 2101S Stainless Steel Can Crusher is ideal for industrial kitchens. The stainless steel structure is rust free and easy to clean, and can easily handle the temperature and conditions in a busy kitchen.
The 2101S Can Crusher can be used to compact the wide range of tins and cans used in food production in a busy industrial kitchen. It is powered exclusively by compressed air, so is free from hydraulic oil and other potential contaminants.
Automotive workshops and manufacturing plants use large volumes of cans, tins and drums whilst working on vehicles.
The Miltek Stainless Steel Can Crusher is ideal for use in this industry, as it can easily compact and crush these cans. Furthermore, the machine is small, can be installed with or without legs, and can seamlessly fit into the workplace. This further facilitates better waste management and recycling, and reduces the disruption caused by carrying waste out to bins.
In environments where hygiene is crucial, the Miltek 2101S is ideal .Containing no electrical parts and risk of contamination, the 2101S is stainless steel and powered exclusively by compressed air. It can therefore be installed in kitchens or hygienic areas without interfering with the hygiene or environmental policies.
Whether it be in a food preparation areas or in storage areas, the stainless steel can press is an ideal addition to handle the range of cans, drums and tins that are used and disposed of in healthcare facilities.
|Capacity||Cans: <7 Gallons (US)|
|Bale weight||<6½ Gal.|
|Degree of Compression||85-90%|
|Noise level||<70 dB (A)|
|Pressure||4950 lbs at 116 psi|