The University of Mary Washington is a liberal arts and sciences university in Virginia. Their waste management partner Sodexo, opted for a Can Crusher to more easily transport and recycle food cans.
Hörby Paint Shop is an auto paint shop and bodywork shop in Sweden. The 101 Can Crusher reduces the cost of refuse and eliminates the need to rent a container.
Rosenlunds Vårdcentral is a hospital in central Stockholm. They use a hygienic 101 Can Crusher to reduce the volume of waste produced.
A Mil-tek technician will guide you through installation, which is done by simply connecting your 2101 Can Crusher to a compressed air supply. You are now ready to start minimizing.
Place an empty tin upright into the machine. The 2101 Can Crusher can handle cans, tins and drums up to 30 litres in size.
To activate, simply close the door and ensure the handle is pressed firmly down. This activates the pressing pate, which is released when the handle is lifted again.
Crushed cans take up 90% less space than filled cans, making them easy to store and transport for recycling.
All kinds - tins, cans, paint cans, oil drums, all kinds of hazardous and non-hazardous containers except pressurized aerosol cans.
No, the most important thing is that the cans are empty. However, to maximize the lifespan of your machine, we recommend rinsing cans in cold water before crushing.
The machine can stand either indoors or out - most important is that you place the machine so that you sort your trash at its source. If you place the machine outside it must be under a roof. Be aware that cold weather conditions can influence the performance of the machine. Your Mil-tek consultant will help to analyze the best place to install the machine.
As they are air-powered (pneumatic) rather than hydraulic, Mil-tek balers are extremely quiet (<70 dB). If you have an existing air-line you simply plug the machine and then your existing compressor acts as the engine. If you need to have a compressor installed, a Mil-tek technician will ensure that the compressor is placed at a distance from the machine and then install an air-hose between the compressor and the machine.
Many food products are packaged in metal tins and cans that, once empty, take up valuable space in bins. Using a Mil-tek 2101 Can Crusher to compact the used cans will reduce volume by 90%.
The Mil-tek 2101 Can Crusher is air-powered meaning that not only is it quiet, there is also no risk of oil contamination. These two key factors mean that it can safely be placed in a hygienic environment where food is prepared.
Empty paint and oil cans are full of air and take up unnecessary space in bins. A Mil-tek 2101 Can Crusher will reduce the volume of empty cans by 90% and can run from an existing air-line or a supplied compressor, reducing running costs and improving energy consumption. The high quality enamel finish also ensures the machine is not affected by hazardous liquid like paint or car oil.
The air powered Mil-tek 2101 Can Crusher is the ideal solution for compressing cans and metal food containers in the Hospital environment. The Mil-tek 2101 Can Crusher is air-powered meaning that not only is it quiet, there is also no risk of oil contamination. These two key factors mean that it can safely be placed in a hygienic environment where food is prepared.
| Height (inches) | 79 |
| Width (inches) | 19 |
| Depth (inches) | 18 |
| Weight | 207 lbs |
| Capacity | Cans: <7 Gallons (US) |
| Bale weight | < 6½ Gal. |
| Height (inches) | 19 |
| Width (inches) | 15 |
| Depth (inches) | 14 |
| Degree of Compression | 85-90% |
| Noise level | <70 dB (A) |
| Pressure | 4950 lbs at 116 psi |
| Approvals | CE |
Menu
